Triad's Diamond Quad Squaring Table was designed to be utilized in a two table wall panel system. The DQ Squaring Table is a means to keep an already framed wall clamped and squared while routing out rough openings with the Triad Handle Bar Router or Triad Router Bridge.

Move the table in and out with a drum switch to adjust for different wall heights. Custom sizes are available upon request.

Heavy-Duty rollers are used to roll walls on and off the table. Rollers are 6" OC the first four feet of the table and 12" OC thereafter; making for a smooth transition on and off the squaring table.

Squaring stops exist at the front end of the table and a continuous squaring lip runs the full length of the table on both sides.

The table can be built in lengths from 16' to 80', and is compatible with Triad's Diamond Quad Framing table, Gen II Framing Table, Generation 3 Framing Table, and the Econ-O-Framer

Specifications:

• Electrical Standard: 120 VAC, 1 PH, 5 AMPS
• Air Requirements: 100 PSI, .5CFM

Capabilities:

• Wall height (standard): 6'9" to 10'3"
• Wall height (optional): 6'9" to 12'3"

*Specifications subject to change without notice.