Routing Station

Maximize your production by automating the routing of openings for framed and sheathed wall panels with the GEN II Routing Station.

About

Triad's Routing Station is made up of two basic components: the Gen II Squaring Table and Routing Bridge.

The Gen II Squaring Table is designed to have a framed wall rolled into place to be clamped and squared. Sheathing is then placed on the framed wall either by hand or with the assistance of the optional Material Handler located on the Router Bridge.

Once in position, the sheathing is simply pinned at the corners using hand-held fastener tools. An operator simply guides the Router Bridge to the correct spot and the router cuts into the sheathing. The router is guided around by the hand or optional joystick. There is a guide on the router bit to keep the bit from overshooting.

Upon completion of the routed opening, the operator disengages the router and presses the optional automatic return selector, sending the Router Bridge back to its original parked position. The squared wall is now ready to roll onto the Sheathing Station.

Gen II Squaring Table Router Bridge

Gen II Squaring Table Specifications:

Specifications:

  • Electrical Standard: 110 Volts, 1 PH, 10 AMPS
  • Air Requirements: 1/2 NPT @ 100 PSI
  • Weight: 6000 lbs. (for 20'L)

Capabilities:

  • Custom built from 12' to 80' lengths of walls
  • Power width adjust for various wall lengths
  • Heavy duty rollers with roller bearings
  • Includes rails to accommodate bridge
  • Continuous squaring lip for precision squaring
  • Simple push buttons on both sides of table operate table in and out

Router Bridge Specifications:

Specifications:

  • Electrical Standard: 110 Volts, 1 PH, 10 AMPS
  • Air Requirements: 1/2 NPT @ 100 PSI
  • Weight: 1200 lbs. (for 9' model)

Capabilities:

  • Custom built for 8' to 16' widths of walls
  • Simple controls for one man operation
  • Fast hand crank system gives 2 direction control simultaneously
  • Positive chain drive in both directions

*Specifications subject to change without notice.

Router Station Options:

  • Joystick operation for all routing functions
  • Automatic Return to park position
  • Automatic Panel Conveyor
  • Material handler with rheostat speed control allows faster operator placement of sheathing

Gen II Squaring Table Options:

  • Knee Wall feature for short walls
  • Chain conveyor

Router Bridge Options:

  • Joystick Control
  • Auto Return
  • Material Handler

Often purchased with: